Balliihoo 4 Inch Pressure Barrel Co2 Control Cap - Full System
Balliihoo 4 Inch Pressure Barrel Co2 Control Cap - Full System
£19.99
Ex Tax: £19.99
- Stock: 18 In Stock
- The Balliihoo 4" Control Cap (To Fit King Kegs And Premium Barrels With A 4 Inch Opening) Has A Standard Over Pressure Release Vent And A Separate Schrader Style Valve, Which Enables Internal Pressure To Be Monitored & The Controlled Introduction Of Co2.
- This Full System Includes - Control Cap - Co2 Top Up Tap - Pack Of 5 x 16gram Food Grade Threaded Co2 Bulbs And A Digital Pressure Reader.
- Co2 Pressure Can Be Topped Up When Necessary Using The Top Up Tap And 16 Gram Threaded Food Grade Co2 Bulbs.
- The Co2 Top Up Tap Allows You To Top Up The Co2 Pressure In your Barrel In Small Increments (And Not Have To Blast The Whole Contents Of A Bulb In One Hit), Meaning Less Wastage And The Ability To Get The Internal Barrel Pressure Just Where You Like It For The Perfect Pint Pour Every Time!
- The Barrel Pressure Can Be Monitored Using The Digital Pressure Gauge.
- The Square Section Rubber Cap Ring Supplied Is Far Superior To The Traditional "Round Section" O-Rings. This Ensures A Good Pressure Tight Seal Without The Need For Overtightening.
- PLEASE NOTE - As this item contains pressurised containers it cannot be sent by Royal Mail & therefore must be shipped by "LAND COURIER" only, this may affect the availability of this product to certain areas.
Tony's Tips
This is everything you could wish for in a Beer Barrel Cap, offering maximum pressure retention with the square section cap rim seal and the versatile Control Top Up System, utilising a schrader style valve for the dual purpose of topping up Co2 pressure in your barrel and also used to take an internal pressure reading, using the press down gauge.
There is now a schrader valve service kit extractor/replacement tool available from Balliihoo to recondition your valve every 20 brews or so.Always top up the pressure with pure CO2 only. Don't use a bike Pump!
The square section rubber seal included with this cap will benefit from a light application on with specially formulated, Pressure Barrel Seal Grease available from Balliihoo to ensure a good airtight seal with no fear of Contaminating the brew.
This is everything you could wish for in a Beer Barrel Cap, offering maximum pressure retention with the square section cap rim seal and the versatile Control Top Up System, utilising a schrader style valve for the dual purpose of topping up Co2 pressure in your barrel and also used to take an internal pressure reading, using the press down gauge.
There is now a schrader valve service kit extractor/replacement tool available from Balliihoo to recondition your valve every 20 brews or so.Always top up the pressure with pure CO2 only. Don't use a bike Pump!
The square section rubber seal included with this cap will benefit from a light application on with specially formulated, Pressure Barrel Seal Grease available from Balliihoo to ensure a good airtight seal with no fear of Contaminating the brew.